A webinar timer your speakers can see
Last updated
OnAirCue is a free webinar timer for hosts who run sessions with several speakers. Each speaker opens a private Stage link and sees the same live countdown, the segment they are in and what comes next. You run the clock and send wrap-up cues from a separate screen, and attendees never see it.
Why do webinar speakers keep running over?
You planned an hour. The first speaker was given twenty minutes and is still on slide twelve at minute thirty. The second speaker trims their talk on the fly, the demo gets rushed, and the Q&A you promised in the invite shrinks to two questions before the hard stop.
It is rarely anyone’s fault. A speaker presenting from home is watching their slides, their notes and the chat at the same time. Most meeting platforms show how long the call has been running, not how long this speaker has left. And the tools you have for nudging them are poor: a chat message they don’t see because their slides are full screen, or a phone held up to your webcam in the hope they glance at the gallery view.
What you need is simple: a countdown each speaker can see, that the audience can’t, and a quiet way to say “two minutes left” without unmuting.
How to time a webinar with OnAirCue
- Step 1
Build the rundown
Create an event, or an episode of a show, and add a segment for each part of the running order. Give every segment a name, a speaker, a colour and a length, then choose whether it counts down or up, holds at zero or moves on by itself, and how early the warning shows.
- Step 2
Share the Stage link
Open Share and copy the Stage link, or show its QR code. Anyone with the link opens it in a browser with no sign-in. The Stage shows the countdown, the current segment, what is up next and any message you send.
- Step 3
Run it from the Producer
Press Start, or Space on the keyboard. Move between segments with Next and Previous or the arrow keys, add or take away 30 seconds or a minute, and send a typed or one-tap message to the Stage. Every screen stays in sync.
- Step 4
Share the Agenda
Send the Agenda link to everyone else involved. It shows the schedule with start times, lengths and speakers, has a Print button, and never shows your private notes.
Example webinar rundown
| Segment | Length | Cue |
|---|---|---|
| Welcome and housekeeping | 3:00 | Warn at 0:30 |
| Speaker one | 20:00 | Warn at 2:00 |
| Speaker two | 15:00 | Warn at 2:00 |
| Live demo | 7:00 | Warn at 1:00 |
| Audience Q&A | 12:00 | Warn at 2:00 |
| Close and next steps | 3:00 | Warn at 0:30 |
| Total | 60:00 |
For a 45-minute slot, take the time out of the talks rather than the Q&A, since Q&A is what attendees stayed for. For a panel, replace the two speaker segments with one moderated segment and put each panellist’s name in the speaker field so the Stage shows who is on.
What a webinar timer needs to do
A private Stage link for speakers
The Stage is a web page, not a feature of your meeting platform. Send its link to your speakers before the session and they open it on a phone, a tablet or a second monitor. It shows the countdown in large type, the current segment and what is up next.
Only people with the link can open it, and the link is not listed anywhere public, so attendees in Zoom, Google Meet or Teams never see a timer on their screen.
Wrap-up warning and overtime
Each segment has a warning with a lead time you choose, such as two minutes before the end of a talk. When it hits, the Stage changes so the speaker knows to start landing the point without anyone saying a word.
Turn on “keep counting past zero” and the Stage shows how far over the speaker is. Watching the overtime count up is often all a speaker needs to wrap up.
Messages from the Producer
Type a short message and it appears on the speaker’s Stage, not in the webinar chat. For the common cases there are one-tap messages: Wrap it up!, 30 seconds left, Check Mic, Look at Camera 1, Keep going and Break in 5m.
If the speaker is reading their notes and not looking, Flash stage makes their Stage screen flash to catch their eye.
Plus or minus time when the schedule shifts
Webinars rarely start on the dot. If the first speaker joins three minutes late or the demo needs a moment to load, add or remove time from the live segment in 30-second or one-minute steps.
You can also quick-edit a segment’s name and length while live, or skip forward with Next, and every speaker’s Stage updates at once.
Setting it up for a remote webinar
Give each speaker the Stage link the day before, with one line on where to put it. The best spot is a phone propped just below the webcam: the speaker can glance down at the clock and still appear to be looking at the audience. A second monitor works too, as long as it sits close to the camera.
Run the Producer on a different device from the one you use to host the webinar. Hosting needs your attention on the meeting window, admitting people and spotlighting speakers; the Producer should be on a laptop or tablet beside you so you never have to switch windows mid-session.
Rehearse once with every speaker’s Stage link open. Start a segment, send a one-tap message and use Flash stage, so each speaker knows what a warning looks like before it matters. It also confirms that every speaker’s link opens on the device they plan to use.
Versus a phone stopwatch and chat messages
A stopwatch on your phone tells you the time but not the speaker, and chat messages compete with attendee questions for their attention. OnAirCue gives the speaker their own clock and a message channel that only they see, so you can keep a session on time without interrupting it.
Frequently asked questions
How do I show a webinar speaker a countdown timer?
Create the webinar’s segments in OnAirCue and send the speaker the Stage link. They open it in any browser, on a phone or second screen, and see a live countdown for their segment. You start, pause and adjust the timer from the Producer screen on your own device.
Does it work with Zoom, Google Meet or Microsoft Teams?
Yes, alongside them rather than inside them. OnAirCue has no plug-in for any meeting platform. The Stage is a web page that runs in its own browser tab or on a separate device, so it works the same whichever platform hosts the webinar.
Can attendees see the timer?
No. Only people who have the Stage link can open it, and it never appears inside the webinar itself. If you want attendees to see the schedule, send them the Agenda link instead, which shows segments and start times but no live countdown or private notes.
How do I tell a speaker to wrap up without interrupting?
Set a warning before the end of each segment so the speaker’s Stage changes at the right moment. You can also send a typed message or a one-tap message such as “Wrap it up!”, or flash the speaker’s screen. None of these appear in the webinar or its chat.
Is it free, and do speakers need an account?
OnAirCue is free to use. Only the host who builds the rundown and runs the Producer needs an account. Speakers open the Stage link in any browser, on a phone, tablet or laptop, with no sign-in and nothing to install.
More answers in the FAQ and the documentation.
Keep your next webinar on time
Build the rundown, send your speakers one link, and run the clock from your own screen.
Related use cases
- Conference speaker timer — A stage countdown on any confidence monitor, with live schedule changes for the stage manager.
- Town hall meeting timer — Time each presenter at a town hall or all-hands and protect the Q&A at the end.